Bronze

Bronze
(Charcoal with brown)

Blu

Blu
(Subtle blue tone with browns)  

powder

Powder
(Light silver grey with taupe/beige) 

sage

Sage
(Medium bluish grey with iron/taupe) 

Mosaics

Brick Mosaic

Brick Mosaic (Available in all 4 colors.)

 

Leaf Mosaic

Leaf Mosaic


Colors, Sizes & Trim

Colors  
GIPMBE Bronze
GIPMBU
Blu
GIPMPR Powder
GIPMSE Sage
Sizes - Rectified
GIPM--/1224 12 x 24
GIPM--/412 4 x 12
GIPM--/28 2 x 8
Mosaics
GIPM--/BK Brick Mosaic
GIPM/LF Leaf Mosaic
Trim  
GIPM--/SBN 2 x 24 Surface Bullnose

Additional Information

Mosaics

The Brick Mosaic - Available in all 4 colors. Pieces are approx. 1-3/8" x 2-7/8".

Leaf Mosaic - The Leaf mosaic is made up of elongated hexagon pieces that are approximately 4-1/4” x 1-1/2”. All four Platform colors are blended together to create a rich and versatile decorative.

Trim

The surface bullnose is made from field that is cut, ground and reglazed.

Usage

Platform is suitable for residential and light commercial applications.

Installation Information 

It is important to blend tile within each carton and from multiple cartons during installation, as well as changing the orientation of pieces with similar graphics to attain a proper mix. 

Most Italian manufacturers recommend a maximum offset of 8” (20 cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 section 4.3.8. Using a leveling system can improve the installation of this product.

Non-Stock

non-stock

testing
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.