Lanka Ligne | Ceramic Wall Tile
The lines of “Ligne” create a wall tile that is both simple and complex. Different tones are blended together in a gentle linear pattern creating an elegant, sophisticated look. The color palette has soft and interesting neutrals with enriching highlights that make this a series that partners well with many different kinds of floor tile. The variation on each piece and from piece to piece create depth and enhance the final effect.
Blanc
Amande
Poudre
Marron
Encre
Colors, Sizes & Trim
| Colors | |
|---|---|
| LALEAE/624 | Amande (Almond) |
| LALEBC/624 | Blanc (White) |
| LALEEE/624 | Encre (Ink Grey) |
| LALEMN/624 | Marron (Brown) |
| LALEPE/624 | Poudre (Powder Grey) |
| Size | |
| Rectified | |
| LALE--/624 | 6 x 24 |
| New Coordinating Trim | |
| LALE--/PB112 | 1/2 x 12 Pencil Bullnose |
| Old Coordinating Trim | |
| *LALE--/PBN18 | 1/2 x 8 Pencil Bullnose |
Usage
Ligne is intended for interior walls.
Coordinating Trim
Expect shade variation between field and trim.
Old Coordinating Trim
*Old trims are being phased out and replaced by new trims item by item, color by color, over time.
Installation
Ligne creates a semi-random pattern of parallel lines which are not intended to continue from piece to piece. Although the lines of 2 adjoining pieces may occasionally connect, it is best to blend the tile, including changing the orientation of the pieces, to accentuate this randomness and get the proper final look.
Ligne is intended for interior walls. If installing with a cement-based adhesive, it is recommended to use flexible setting material that meets the ISO S1 standard (e.g. Servolight by Kiesel). All substrates should be properly reinforced to be sure there is no movement. Wood studs need to be dry and properly braced with a minimum depth of 3-1/2”. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing.
Most manufacturers recommend a maximum offset of one-third (1/3) of the length of the tile on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8.
It is important to blend tile within each carton and from multiple cartons during installation.
