Marca Corona Foyer Royal | Italian Inkjet Full-Body Porcelain Tile
Marca Corona is expanding their impressive collection of marble looks with this stunning new marble in the Foyer Royal series. The Cozy color is a warm, creamy sandstone look (the Turkish Marmo Mediterraneo) that is perfectly on trend. Cozy comes in both Natural and Polished 12 x 24, a Herringbone mosaic and a Brick mosaic in Natural. The Cozy also comes in additional sizes, the 24 x 48 in both finishes and the 4" Hexagon in Natural.
Cozy
4" Hex Mosaic Natural
(Available in Cozy (CY) color only)
Herringbone Mosaic Natural
(Available in all colors)
Herringbone Mosaic Natural
(Available in all colors)
Colors, Sizes & Trim
| Color | ||
|---|---|---|
| MCFRCY | Cozy | |
| Sizes - Natural Finish, Rectified | ||
| MCFRCYN/1224 | 12 x 24 Natural | |
| *MCFRCYN/2448 | 24 x 48 Natural | Mosaics (Natural Finish Only) |
| MCFRCYN/4HX | 4" Hex Mosaic | |
| MCFRCYN/BK | Brick | |
| MCFRCYN/HB | Herringbone | |
| Sizes - Polished Finish, Rectified | ||
| MCFRCYP/1224 | 12 x 24 Polished | |
| *MCFRCYP/2448 | 24 x 48 Polished | |
| Trim | ||
| MCFRCYN/SBN | 3 x 24 Natural Surface Bullnose | |
| MCFRCYP/SBN | 3 x 24 Polished Surface Bullnose | |
Additional Information
Sizes
* The 24 x 48 has a larger caliber and is not modular with the other sizes.
Trim
The surface bullnose is made from field tile that is cut, ground and reglazed.
Usage & Installation
Foyer Royal in Natural finish is suitable for residential and commercial applications. For the Polished finish, please see notes below.
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information. Using a leveling system can improve the installation of this product.
Polished Finish
The Polished finish is suitable for walls and for residential and light commercial floors that do not require DCOF. As with all shiny material, the polished surface is susceptible to scratching during installation and use, and extra care should be taken when handling the material. The factory does not recommend using an epoxy based grout because it can be very hard to remove from the surface of the tile during grouting. They also do not recommend using a sealer on the polished tiles.
Polished material can be etched with acids. Avoid detergents, solvents or acid-based products containing hydrochloric acid, citric acid, acetic acid or abrasive components. Do not use cleaning agents like abrasive cleaners which might scratch the surface. It is advisable to test a small area in a not highly visible section of the tiles before proceeding to clean the whole surface.
Packaging
Due to the special packing required for the large format tiles, orders for the 24x48 size must be for full box quantities only & we are not able to fill orders on the same day as placed.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.