Cerim Exalt | Porcelain Tile
Exalt is a selection of marbles that offers the aesthetic of high-class material that embodies a strongly stated elegance. In their quest to make a true interpretation of these marbles, Cerim is taking advantage of the latest inkjet technology that allows them to layer white glazes over colors. This creates one of the most realistic marble looks available, as there are no visible pixels. It really looks like there are veins underneath the surface. With two white marbles this is a collection that brings authentic beauty to any project.
Magic White
Fairy White
Fairy White 4" Hex
Magic White 4" Hex
2 x 2 Mosaic
Magic White Mosaic
Fairy White Mosaic
Colors, Sizes & Trim
| Colors | |
|---|---|
| CMETFW | Fairy White (Bianco Carrara) |
| CMETMW | Magic White (Bianco Bella) |
| Natural Finish - Size | |
| Rectified | |
| CMET--N/1224 | 12 x 24 |
| CMET--N/22 | 2 x 2 Mosaic |
| CMET--N/4HX | 4" Hex |
| Natural Finish - Trim | |
| CMET--N/SBN | 2 x 24 Surface Bullnose |
| Lucido (Polished) Finish - Size | |
| Rectified | |
| CMET--L/1224 | 12 x 24 |
| Lucido (Polished) Finish - Trim | |
| CMET--L/SBN | 2 x 24 Surface Bullnose |
Please Note
It’s never advisable to select tile from images alone, especially when viewed on a screen since they can look different on different kinds of screens. Pictures are provided to give an idea of the look and variation. Colors are intended as a guide only and may vary from actual tile. Sizes listed are nominal. Please check samples before making final selection and to get actual dimensions for layout.
Trim
The Surface Bullnose is made by cutting field tile, grinding the edge and reglazing it.
Installation Information
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information. Using a leveling system can improve the installation of this product.
Natural Finish Usage
Natural Finish is suitable for walls and residential and light to moderate commercial floors.
LUCIDO (Polished) CLEANING AND MAINTENANCE
Lucido Finish is suitable for walls and residential and light to moderate commercial floors that do not require DCOF. As with all shiny material, the polished surface is susceptible to scratching during installation and use, and extra care should be taken when handling and grouting. The factory does not recommend sealing or treating this material.
Polished material can be etched with acids. Avoid detergents, solvents or acid-based products containinghydrochloric acid, citric acid, acetic acid or abrasive components. Do not use cleaning agents like abrasivecleaners which might scratch the surface. It is advisable to test a small area in a not highly visible section ofthe tiles before proceeding to clean the whole surface.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.