Lanka Dune | Ceramic Wall Tile
The softly undulated surface of Lanka’s Dune series mimics the rolling hills of sand on the beach. Structured wall tile at a competitive price, this series can be used in entire areas or as an accent with coordinating products.
Colors, Size & Trim
Colors | |
---|---|
LADUWM | White Matte |
LADUWG | White Glossy |
LADUBC | Bianco Carrara |
Size (Rectified) | |
LADU--/1224 | 12 x 24 |
Coordinating Trim *See notes |
Additional Information
Colors
Bianco Carrara - It is important to blend tile within each carton and from carton to carton during installation, as well as changing the orientation of pieces with similar graphics, to attain a proper mix and blend.
Accent Tile
For projects where Dune is being used as an accent, please note that Lanka Bloc should work well as a coordinating plain field.
• LADUWG/1224 try color Glossy White (LABC101G/1224)
• LADUWM/1224 try color Matte White (LABC101M/1224)
*Coordinating Trim
It is possible to find other products that coordinate with Lanka Dune. If trims are needed, the 12” Coordinating trims in Lanka Tuxedo should work well.
• For LADUWG use LATO1G (Glossy White)
• For LADUWM & LADUBC use LATO1M (Matte White)
LATO--/PB112 | ½ x 8 Pencil Bullnose |
LATO--/PBSN | Corner Pencil Bullnose |
LATO--/A112 | 12” Quarter Round |
LATO--/AC | 1” Beak |
Coordinating trims should be presented with an understanding that there will not be a perfect match and there may be some variation from production run to production run.
Lanka Walltiles PLC is ISO 14001 certified.
Usage & Installation Information
Dune is suitable for use in commercial and residential interior wall applications.
Dune is intended for interior walls. If installing with a cement-based adhesive, it is recommended to use flexible setting material that meets the ISO S1 standard (e.g. Servolight by Kiesel). All substrates should be properly reinforced to be sure there is no movement. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing. Wood studs need to be dry and properly braced with a minimum depth of 3 1/2”. Care should be taken to have the pattern align from piece to piece to create a continuous flow.