White  (GIBSWE)

White

Light Shell  (GIBSLS)

Light Shell

Warm Slate  (GIBSWS)

Warm Slate

Earth (GIBSEH)

Earth

Terracotta (GIBSTA)

Terracotta


Colors, Size & Trim

Colors  
GIBSEH
Earth
GIBSLS Light Shell
GIBSTA Terracotta
GIBSWE White
GIBSWS Warm Slate
Size - Non-Rectified - R11
GIBS--/218 2 x 18
Coordinating Trim   
GIBS--/MBN 1/2 x 18 Miter Bullnose

Additional Information

Images

Please Note

It’s never advisable to select tile from images alone, especially when viewed on a screen since they can look different on different kinds of screens. Pictures are provided to give an idea of the look and variation. Colors are intended as a guide only and may vary from actual tile. Sizes listed are nominal. Please check samples before making final selection and to get actual dimensions for layout.

trim

Usage and Installation Information

Trim is made by cutting the profile from pieces of tile. Expect variation in color and size between field and trim.

To attain the proper mix of graphics and color, it is important to pull from multiple boxes during installation, rotate pieces, and note the placement of the different images to get the proper final blend.

 The minimum recommended grout joint is 3/16”. It is not recommended to use spacers because the edges are irregular and there can be variation in size from piece to piece. Please note that the material is non-rectified. If using more than one item together, please check the caliber and be aware that you may have to adjust the size of the grout joint to make your pattern work.

 italyitalyitaly
testing

The Dynamic Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.