Links to Individual Color Pages   

Amalfi Lux . Antique Portofino . Avenue White . Cortina White . Florence Grey . Positano Blue

Cortina White

Cortina White

Avenue White

Avenue White

Positano Blue

Positano Blue

Amalfi Lux

Amalfi Lux

Antique Portofino

Antique Portofino

florence grey

Florence Grey



Colors, Sizes & Trim

Colors  
GIALAL Amalfi Lux
GIALAP Antique Portofino
GIALAW Avenue White
GIALCW Cortina White
GIALFG Florence Grey
GIALPB Positano Blue
Sizes - Rectified (All Colors)  
GIAL--/12 x 24 12 x 24
Sizes - Rectified  
GIAL--/2448 24 x 48*
Mosaic  
GIAL--/BK Brick
GIAL--/3EH 3" Elongated Hex Mosaic**
Trim  
GIAL--/SBN 3 x 24 Surface Bullnose

Trim

The surface bullnose is made from field tile that is cut, ground and reglazed.

Sizes

*24 x 48 available in Cortina White, Amalfi Lux, Positano Blue only. 

Mosaics

The Brick mosaic can be used as field, or it can be cut into strips making a cost effective decorative insert.

**3" Elongated Hex available in Cortina White, Amalfi Lux, Positano Blue only. 

Usage & Handling

Antique Lux is suitable for residential and light commercial use.

Installation Information

It is important to blend tile within each carton and from multiple cartons during installation, as well as changing the orientation of pieces with similar graphics to attain a proper mix. Most Italian manufacturers recommend a maximum offset of 8” (20 cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 section 4.3.8. Using a leveling system can improve the installation of this product.

Matte Finish:
testing
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.