Trim

Expect variation in color and size between field and trims. There is limited shade variation on the pencil bullnose; the shading is more uniform than the field tile.

Usage & Installation

Please note that the Alaska is not completely flat, and the edges also have rustic details which means they are uneven rather than level. This is intentional and adds to the handcrafted look. It also requires special attention during installation. Setting it straight joint will minimize the lippage. The minimum recommended grout joint is 3/32”, and a larger grout joint works well with the rustic character of Alaska and will also help mitigate lippage if set with a broken joint (which should still be less than 1/3 the length). 

Most manufacturers recommend a maximum offset of one-third (1/3) of the length of the tile on all large format tiles when setting a running bond. Because of the rustic nature of Alaska, lippage will be evident with even small offsets and will increase as the offset increases. If you plan to set Alaska broken joint please do a layout to check and confirm that your offset is acceptable and increase the size of the grout joint to mitigate lippage. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8. 

All substrates should be properly reinforced to be sure there is no movement. Wood studs need to be dry and properly braced with a minimum depth of 3-1/2”. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing.

 Download Product Sheet