HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | STYLETECH METAL



geotech  porcelain tile
Fusing the urban industrial feeling with the imagery of foundry metals, Floor Gres created the authenticity of a metal-look tile in three colors through their digital technology, while offering the durability and ease of maintenance of a porcelain tile. The honed surface of the “Soft” Finish adds extra richness to the three colors. Suitable for both commercial and residential installations.

 

 

Ivory Taupe
Metal 01 Metal 02

Sage

Metal 03  



TILE PRODUCT INFORMATION
SIZE
Rectified (Stocked in Soft Finish)
16 X 32
24 X 48
32 X 71
2 X 2 Mosaic
FGSM-S/1632
FGSM-S/2448
FGSM-S/3271
FGSM-S/22

24 X 48 & 32 x 71 Size Handling Information
Due to the special packing required for the large format tiles, orders for the 24 x 48 and 32 x 71 size must be for full box quantities only and we are not able to fill orders on the same day as placed.

COLORS
It is important to mix tiles within each carton and blend from several cartons to get a proper balance of variation.
FGSM1S
FGSM2S
FGSM3S
Metal 01 (Dk. Steel Grey)
Metal 02 (White)
Metal 03 (Lt. Grey)

TRIM
Surface Bullnose is made from field tile that is cut, ground and reglazed.
FGSM--S/SBN 2 x 24 Surface Bullnose

NON-STOCK SIZES & FINISHES

USAGE
Styletech Metal Series is suitable for both residential and commercial installations.

INSTALLATION INFORMATION
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting running bond. Please refer to ANSI requirements for setting large format tiles ANSI A108.02 Section 4.3.8.

There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.

PHYSICAL CHARACTERISTICS
testingtesting
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.



Back to Top


Previous Page