HOME | TILE BY MATERIAL | CERAMIC WALL TILE | RIVA
riva wall tile


Riva, the riverbed, where earth meets water, is the idea behind the Riva series with its translucent "watery glazes". Riva redefines the aesthetics of an artisanal tile series by combining the clean and simple lines of a contemporary look with the richness and depth of translucent glazes. The glazes pool differently depending upon the size and shape of both the field and trim pieces. This is a natural and inherent characteristic of this type of glazing method, and contributes to the desired end result.

 

Snow

 

Milkweed
Lichen Barley

 

Peat Honey

 

Willow Mushroom
 
 
PRODUCT INFORMATION
SIZES
3 x 6
2 x 8
4 x 8
LARA--/36
LARA--/28
LARA--/48
2 x 8 and 4 x 8 sizes are modular if set with a small grout joint. 3 x 6 is not modular with the other sizes but can be used with them in non-modular patterns.

COLORS
Snow
Milkweed
Lichen
Barley
Peat
Honey
Willow
Mushroom
LARA401
LARA501
LARA503
LARA504
LARA506
LARA508
LARA509
LARA512

3 X 6 MOLDINGS AND TRIM
2 x 6 Surface Bullnose
2 x 2 Down Angle
6" Quarter Round
1" Beak
1 - 1/2 x 8 Cap Molding
Corner Cap Molding
S4269
SN4269
A106
AC106
CM18
CMN18

4 X 8 TRIM
3 x 8 Surface Bullnose
3 x 3 Down Angle
4 x 8 Bullnose
4 x 8 Bullnose
4 x 8 Left Down Angle
4 x 8 Right Down Angle
8” Quarter Round
1” Beak
S4389
SN4389
S4849
S4489
SCL4489
SCR4489
A108
AC106

INSTALLATION INFORMATION
Expect shade variation between field sizes and within each color. It is important to blend tile from multiple boxes during installation. Due to the shape of the pieces and the nature of production, this is especially true for variation between the three field sizes and between field and trims. Curved pieces like quarter round and corners, because of their shapes, may have more pooling and different pooling than other pieces. Riva is intended for interior walls. If installing with a cement-based adhesive, it is recommended to use a flexible setting material. All substrates should be properly reinforced to be sure there is no movement. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing.

Back to Top

Previous Page