HOME | TILE BY MATERIAL | GLASS TILE | PURO

puro

Puro is pure simplicity and elegance. With frosted and glossy glass pieces mixed together and mounted in a brick pattern, Puro can be used as an accent or in entire areas. The soft, subtle colors will be sure to work beautifully with many other materials. The Puro colors, especially made to work with the Lanka Dolce (LADE) series, are classic neutrals that will coordinate with many other materials. See product sheet for handling and usage information.

 

mist raincloud

Mist
VOPO803

Raincloud
VOPO804
bubble mint
Bubble
VOPO805

Mint
VOPO806
putty storm
Putty
VOPO807

Storm
VOPO810
SIZES
VOPO--/14 1 x 4 Frosted & Glossy Mix

COLORS
VOPO803
VOPO804
VOPO805
VOPO806
VOPO807
VOPO810

Mist (Lightest Grey)
Raincloud (Light Grey)
Bubble (Light Blue)
Mint (Pale Green)
Putty (Taupe)
Storm (Dark Grey)


USAGE
Puro is suitable for interior walls that get some moisture, like shower walls, but should not be used in steam showers, saunas or any area submerged in water. For pool or other wet area projects, face-mounted material may be available on a special order basis depending on quantity and time. They may also be suitable for low traffic interior floors but scratching will occur.

PRODUCT INFORMATION
Glass can vary within each run and from production run to production run. Glass tile may be susceptible to scratching in handling and installation, as well as use.
Brochure colors are intended as a guide only and may vary from actual tile. Please check tile samples before making final selections.

SETTING GUIDELINES
Only use white adhesives with high adhesion and elasticity which are especially recommended for installing glass. To avoid trowel marks and shadows showing through the glass after installation, smooth out any trowel marks with the flat edge of the trowel. All substrates should be properly reinforced to be sure there is no movement. Wood studs need to be dry and properly braced with a minimum depth of 3 1/2”. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing. Please refer to the TCNA HANDBOOK for more specific information regarding installation of glass tile. Glass tile may be susceptible to scratching in handling and installation, as well as use. Tile may not be perfectly flat or square. It is important to mix tiles within each carton and from several cartons to get a proper blend of variation. Expect variation of color from production run to production run.
 

Back to Top


Previous Page