HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | MARMORIS
Mamoris Photo Gallery

Marmoris looks like marble in all its naturalness. Nature meets design with the technical features of porcelain. By using the latest inkjet technology Marmoris captures and creates the multiple nuances, tones and strong veining that one would expect to find in marble. To acheive this tremendous range of variation it is necessary to mix tiles within each carton and from at least 4-5 cartons during installation.
tivoli
Tivoli (EAMSTI)

rosso
Navona (EAMSNA)



TILE PRODUCT INFORMATION

SIZES
13 x 13
EAMS--/1313  
12 x 24 EAMS--/1224  

FINISHES
Available in two finishes:
Natural EAMS--N
 
A Matte finish with the look of natural stone.

Lappato EAMS--L (Lappato finish is Rectified)
A Semi-Polished finish that is not completely polished. It has a reflective character with a slight surface texture. Lappato finish is also Rectified. Suitable for light commercial and residential applications. Cleaning and maintenance: Like natural stone, etching and/or staining from oils, wine or other acidic foods can occur with semi-polished porcelain. For cleaning tiles with a semi-polished finish, it is recommended to use neutral and non-abrasive agents. Avoid solvents or acid-based products. It is advisable to test a small area in a not highly visible section of the tiles before proceeding to clean the whole surface.


COORDINATING TRIM
Expect size and shade variation.
Natural (Matte)
Surface Bullnose
EAMS--N/SBN
13" Quarter Round EAMS--N/A113
Beak EAMS--N/AC113

•Lappato (Semi-Polished & Rectified)
Surface Bullnose EAMS--L/SBN
13" Quarter Round EAMS--L/A113
Beak EAMS--L/AC113
•The surface bullnose is made from field tile that is cut, ground and then reglazed.

TESTING

PEI V - Natural Finish only
Coefficient of Friction: ≥ 0.60 ASTM C 1028-07

The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.

MARMORIS TILE PHOTO GALLERY
Mamoris Photo Gallery

USAGE & INSTALLATION
Suitable for floor, wall and counters. To acheive this tremendous range of variation it is necessary to mix tiles within each carton and from at least 4-5 cartons during installation.

Back to Top


Previous Page